>
I forgot about the wingtips - they are 1/8" sheet you are correct. A
small piece of 1/8x3" wide should do, say 8" or so.
Al
> Thank you for the help. My local hobby shop doesn't carry 1/8x1/2 TE
> stock so I'm going to have to make my own. Aren't the wing tips 1/8
> sheet? I sorted out my box of balsa "scraps" and found most of the
> wood I need. This plane sure doesn't take very much to build it!
>
> James Fritz
> Fort Collins, CO
>
> > There's no 1/8" wood. You will need a small amount of 1/8 lite-ply
> and a
> > 1/8" dowel (36" should be fine) and 36" 1/8"x1/2" TE stock. That
> and the
> > carbon fiber for the wing spar and boom.
> >
> > I'd get 2 sheets of 1/16" just to be safe. Contest grade is better
> if
> > you can get some.
> >
> > Allan
> >
> >
> ======================================================================
> =========
> > Allan Wright Jr. | Without love life's just a long
> fight - Southside
> > University of New Hampshire +---------------------------------------
> -----------
> > Research Computing Center | WWI Modeling mailing list: wwi@w...
> > Internet: aew@u... | WWI Modeling WWW Page:
http://www.wwi-
> models.org
> >
> ======================================================================
> =========
>
>
>
> To unsubscribe from this group, send an email to:
> BugHLG-unsubscribe@yahoogroups.com
> Home Page -
http://groups.yahoo.com/group/BugHLG/
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
===============================================================================
Allan Wright Jr. | Without love life's just a long fight - Southside
University of New Hampshire +--------------------------------------------------
Research Computing Center | WWI Modeling mailing list: wwi@...
Internet: aew@... | WWI Modeling WWW Page:
http://www.wwi-models.org
===============================================================================