Bug HLG

Archive of the Yahoo! Groups mailing list for the Bug hand-launch glider 2002-2018

From: Mark Moran <flyeround@...>
Date: Monday, February 18, 2013 4:33 AM
Subject: Re: [BugHLG] Glue?
Hi there. I always use a drop of Cyano (not the water-thin one) for the carbon tube joints and, unless I am in a hurry, PVA for the rest. Joints are quite stong enough as designed although I always now add triangular gusset inboard of the wing tip/final rib and the t/edge as there can be some flex there from launches.  I have now built, I thnk, eight of these and they are wonderful.  MarkM --- On Mon, 18/2/13, Night <nightowl_pariah@yahoo.com> wrote: From: Night <nightowl_pariah@...> Subject: [BugHLG] Glue? To: BugHLG@yahoogroups.com Date: Monday, 18 February, 2013, 4:02 I am building my first Bug.  I'm going to build it stock, but I have a question.  What is the best adhesive to use to glue the ribs to the carbon tube spar?  Or do you bother gluing it?  Are the glue joints between the ribs, leading edge and trailing edge, and covering enough to keep the ribs solidly in place?  Thanks. Nightowl ------------------------------------ Home Page - http://groups.yahoo.com/group/BugHLG/ Yahoo! Groups Links [Non-text portions of this message have been removed]
From: "airporter" <airporter@...>
Date: Sunday, February 17, 2013 11:56 PM
Subject: Re: [BugHLG] Glue?
I am building my first Bug. I'm going to build it stock, but I have a question. What is the best adhesive to use to glue the ribs to the carbon tube spar? CA is one of the best, fast and sticks to the carbon (clean with alcohol or lacquer thinner before using) very well. Or do you bother gluing it? You MUST glue the ribs to the spar. Are the glue joints between the ribs, leading edge and trailing edge, and covering enough to keep the ribs solidly in place? Yes, but I’ve been using carbon caps, 1.5 mm x .06 mm available from A2Z Corp, to make a nearly indestructible wing as this really ties things together. Although the original did not require this. airporter [Non-text portions of this message have been removed]
From: "Night" <nightowl_pariah@...>
Date: Sunday, February 17, 2013 11:02 PM
Subject: Glue?
I am building my first Bug. I'm going to build it stock, but I have a question. What is the best adhesive to use to glue the ribs to the carbon tube spar? Or do you bother gluing it? Are the glue joints between the ribs, leading edge and trailing edge, and covering enough to keep the ribs solidly in place? Thanks. Nightowl