From: "jp_fritz" <j_fritz@...>
Date: Sunday, April 21, 2002 11:23 AM
Subject: Re: How much wood?
Date: Sunday, April 21, 2002 11:23 AM
Subject: Re: How much wood?
Thank you for the help. My local hobby shop doesn't carry 1/8x1/2 TE
stock so I'm going to have to make my own. Aren't the wing tips 1/8
sheet? I sorted out my box of balsa "scraps" and found most of the
wood I need. This plane sure doesn't take very much to build it!
James Fritz
Fort Collins, CO
> There's no 1/8" wood. You will need a small amount of 1/8 lite-ply
and a
> 1/8" dowel (36" should be fine) and 36" 1/8"x1/2" TE stock. That
and the
> carbon fiber for the wing spar and boom.
>
> I'd get 2 sheets of 1/16" just to be safe. Contest grade is better
if
> you can get some.
>
> Allan
>
>
======================================================================
=========
> Allan Wright Jr. | Without love life's just a long
fight - Southside
> University of New Hampshire +---------------------------------------
-----------
> Research Computing Center | WWI Modeling mailing list: wwi@w...
> Internet: aew@u... | WWI Modeling WWW Page: http://www.wwi-
models.org
>
======================================================================
=========