Bug HLG

Clark, Use the same rib spacing as the rest of the ribs. Cut the plan apart at the W3 ribs and tape a piece of paper between the cut. Keep the same spar hole in the W3 rib and the tip rib. The spar holes in the other ribs will have to be located by placing the spar over the ribs and marking them. John On Sun, 21 Mar 2004 10:52:33 -0600 clark driggs <invrtd@...> wrote: > When adding the extra rib, did you have to change the hole in the rib for the spar or did you just leave everything as on the plans. Also how far did you space the rib out? Is there a chance you might have a drawing of your moded wing? > > Clark > ----- Original Message ----- > From: John Gallagher > To: BugHLG@yahoogroups.com > Sent: Monday, March 15, 2004 10:19 AM > Subject: Re: [BugHLG] Re: 1.8 oz/ft2 BUG > > > Rib W3. the first rib to either side of the center section. > > John > > On Mon, 15 Mar 2004 07:12:50 -0600 clark driggs <invrtd@...> wrote: > > which extra rib number did you add. > > ----- Original Message ----- > > > Sign up for Internet Service under $10 dollars a month, at http://isp.BlueLight.com > > > Home Page - http://groups.yahoo.com/group/BugHLG/ > > > > > > ------------------------------------------------------------------------------ > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > http://groups.yahoo.com/group/BugHLG/ > > b.. To unsubscribe from this group, send an email to: > BugHLG-unsubscribe@yahoogroups.com > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > [Non-text portions of this message have been removed] > > > > Home Page - http://groups.yahoo.com/group/BugHLG/ > > > Yahoo! Groups Links > > > > > > Sign up for Internet Service under $10 dollars a month, at http://isp.BlueLight.com