From: "raincityflyer" <lewis08@...>
Date: Sunday, March 18, 2012 10:47 PM
Subject: Anyone Building Yet?
Date: Sunday, March 18, 2012 10:47 PM
Subject: Anyone Building Yet?
I got started building this weekend and posted an update in the files section.
Changes so far:
Full flying elevator - First attempt at this new design. It's a little heavy, but works how I imagined.
Fuselage - I like my servos standing up, so I changed the shape a bit. Also added a curved top, bottom and some side reinforcement. It's covered with tinted Water Based Poly Urethane (WBPU) and covered with .75 oz fiberglass.
Wing - I curved the LE all the way around to the tip and squared it off. I also like to let my ribs into the TE, so I used a wider one and slotted it to accept the ribs. I was out of 1/8" CF for the spar, so I used a Skyshark P100. Those of keen eye will notice that there's an extra rib bay. My LB will be 36-1/2" span. I's turning out a little heavier than I'd like, so the extra square inches will help.
Good luck to those building!
Chris in Seattle